Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve

PDF
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 1 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 2 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 3 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 4 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 5 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 6 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 7 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 8 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 9 - Agronetto
Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve | Billede 10 - Agronetto
Er du interesseret i reklamen?
1/10
PDF
Pris:
efter forespørgsel
Forhør om pris
Kontakt sælgeren
Type: stubharve
Sted: Ukraine m.Dnipro8446 km to "United States/Columbus"
Identifikationsnummer på forhandlerinventar: 10539
Oprettelsesdato: 24. maj 2025
Beskrivelse
Dækning: 6,5 m
Tilstand
Tilstand: ny

Flere oplysninger — Ny Verti-till turbo cultivator Green Wave 6.5 m Euro stubharve

In the presence of units with different working widths: 2.6 m, 3.9 m, 5.2 m, 6.5 m, 7.8 m, 9.1 m, 10.4 m, 11.7 m, 18.2 m.
Designed for various types of autumn-spring field work:


field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.


Advantages and design features of the Green Wave Euro vertical tillage turbo cultivator with a working width of 6.5 m:


it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.


Basic equipment:


turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.


Additional equipment:


tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).


Specifications:

Type ... trailed
Tractor hitch ... pendulum
Average speed, km / h ... 15
Working width, m ... 6.5
Working length, m ... 8
Length during transportation, m ... 8
Height during transportation, m ... 3.9
Width during transportation, m ... 2.95
Total weight, t ... 6.85
Number of spring blocks, pcs … 20
Number of turbo disks, pcs ... 40
The distance between the turbo disks, m ... 0.162
Depth of processing, mm ... 0-180
Depth adjustment ... set of clips 50/30/19/10 / 7mm on the rods of hydraulic cylinders
Tire Sizes:
The support wheels of the wing frames ... 10.0 / 75-15.3 (14PR)
The support wheels of the frames of the central frame ... 19.0 / 45-17 (18PR)
Tire pressure, bar ... 4-5
Hydraulic system pressure, bar ... 180
Minimum tractor power, hp ... 280
When deep processing is recommended, hp ... 330
The number of staff, people ... 1
field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.
tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).
Vis hele kommentaren
Vigtigt
Dette tilbud er kun til information. Indhent nærmere oplysninger hos sælgeren.
Købstips
Sikkerhedstips
Bekræftelse af sælger

Hvis du beslutter at købe udstyret til en lav pris, skal du sikre, at du kommunikerer med den rette sælger. Find ud af så mange oplysninger som muligt om udstyrets sælger. En måde til at snyde på, er at lade som om, du er en reel virksomhed. Hvis der opstår mistanke, skal du informere os for en yderligere kontrol ved brug af formularen til feedback.

Priskontrol

Før du beslutter dig til at købe, skal du undersøge adskillige salgstilbud grundigt for at opnå en forståelse af den gennemsnitlige pris på dit valgte udstyr. Hvis prisen på det tilbud, du kan lide, er meget lavere end lignende tilbud, skal du tænke dig godt om. En betydelig prisforskel er muligvis tegn på skjulte defekter eller et forsøg fra sælgerens side på at svindle eventuelle købere.

Køb ikke produkter med en for lav pris i forhold til den gennemsnitlige pris for lignende udstyr.

Stol ikke på tvivlsomme løfter og forudbetalte varer. Hvis du er i tvivl, skal du ikke være bange for at bede om yderligere oplysninger. Bed om flere fotografier og dokumenter for udstyret. Kontrollér, at dokumenterne er ægte. Stil spørgsmål.

Tvivlsom forudbetaling

Den mest almindelige form for svindel. Uhæderlige sælgere beder eventuelt om en forskudsbetaling for at "booke" din ret til at købe udstyret. Svindlere kan således indsamle et stort beløb og forsvinde, og ikke længere kontakte dig.

Varianter af denne form for svinder omfatter:
  • Overførsel af forudbetalingen til kortet
  • Foretag ikke nogen forskudsbetaling uden dokumenter, som bekræfter pengeoverførslen, hvis sælgeren er i tvivl i løbet af forhandlingerne.
  • Overførsel til mellemmandens konto
  • Du skal være på vagt over for en sådan anmodning, da du højst sandsynligt har at gøre med en svindler.
  • Overførsel til en firmakonto med et lignende navn
  • Vær opmærksom på, at svindlere muligvis udgiver sig for at være velkendte virksomheder ved at ændre navnet en lille smule. Overfør ikke penge, hvis der er tvivl om firmanavnet.
  • Erstatning af egne oplysninger på en faktura fra en reel virksomhed.
  • Før du foretager en overførsel, skal du sikre, at de specificerede oplysninger er korrekte, og om de har forbindelse til den specificerede virksomhed.
Fandt du et svindelnummer?
Giv os besked
Sikkerhedstips
PDF
Sælger du maskiner eller køretøjer?
Det kan du gøre hos os!
Lignende reklamer
Pris efter forespørgsel
Dækning 6,5 m Driftsdybde 180 mm Påkrævet traktorstyrke 280 HK
Ukraine, m.Dnipro
Kontakt sælgeren
ny Disk-share harrow 4.2 m stubharve ny Disk-share harrow 4.2 m stubharve
2
Pris efter forespørgsel
Dækning 4,2 m Driftsdybde 400 mm Påkrævet traktorstyrke 280 HK Driftshastighed 15 km/h
Ukraine, m.Dnipro
Kontakt sælgeren
ny Spring teeth and cables 3M, 2секции under tilling machines stubharve ny Spring teeth and cables 3M, 2секции under tilling machines stubharve ny Spring teeth and cables 3M, 2секции under tilling machines stubharve
3
191 € 9.033 UAH ≈ 1.425 kr.
Dækning 3 m
Ukraine, m.Dnipro
Kontakt sælgeren
Pris efter forespørgsel
Dækning 18,2 m
Ukraine, m.Dnipro
Kontakt sælgeren
35.000 US$ ≈ 30.740 € ≈ 229.300 kr.
2006
Ukraine, Farbovane
Kontakt sælgeren
25.000 US$ ≈ 21.960 € ≈ 163.800 kr.
Dækning 11,7 m Driftsdybde 127 mm Påkrævet traktorstyrke 350 HK Driftshastighed 8 km/h
Ukraine
Kontakt sælgeren
11.650 € ≈ 86.920 kr.
2019
Dækning 3 m Driftsdybde 250 mm Påkrævet traktorstyrke 130 HK
Ukraine, Shumskoy r-n, s. V.Dederkaly
Kontakt sælgeren
Lemken KOMPAKTOR stubharve Lemken KOMPAKTOR stubharve
2
12.000 € ≈ 89.530 kr.
2006
Dækning 6 m
Ukraine, Kyiv
Kontakt sælgeren
5.600 US$ ≈ 4.918 € ≈ 36.690 kr.
2020
Dækning 3 m Driftsdybde 120 mm Påkrævet traktorstyrke 90 HK
Ukraine
Kontakt sælgeren
Pris efter forespørgsel
2022
Ukraine
Kontakt sælgeren
Pris efter forespørgsel
2024
Dækning 5 m Driftsdybde 250 mm Påkrævet traktorstyrke 170 HK
Ukraine, Shumskoy r-n, s. V.Dederkaly
Kontakt sælgeren
Pris efter forespørgsel
2012
Dækning 13,5 m
Ukraine, Zolochiv
Kontakt sælgeren
15.300 € ≈ 114.200 kr.
2025
Dækning 3 m Driftsdybde 250 mm Påkrævet traktorstyrke 140 HK
Ukraine, Lutsk
Kontakt sælgeren
12.000 US$ ≈ 10.540 € ≈ 78.630 kr.
2004
Dækning 6,5 m
Ukraine
Kontakt sælgeren
9.200 € ≈ 68.640 kr.
2025
Dækning 3 m Driftsdybde 300 mm Påkrævet traktorstyrke 150 HK
Ukraine, Lutsk
Kontakt sælgeren
1 € ≈ 7,46 kr.
Dækning 6 m Driftsdybde 300 mm Påkrævet traktorstyrke 240 HK
Ukraine, Mironovka
Kontakt sælgeren
Pris efter forespørgsel
2025
Driftsdybde 250 mm
Ukraine, Lutsk
Kontakt sælgeren
19.800 € ≈ 147.700 kr.
2022
Dækning 3 m Påkrævet traktorstyrke 200 HK
Ukraine, Lutsk
Kontakt sælgeren
14.000 US$ ≈ 12.300 € ≈ 91.740 kr.
Dækning 4,8 m
Ukraine
Kontakt sælgeren
19.000 US$ ≈ 16.690 € ≈ 124.500 kr.
2008
Dækning 5 m Driftsdybde 350 mm
Ukraine, Ohinki
Kontakt sælgeren